Looptober24/14Slower/14Slower.ino

// Better sequencer which uses interrupts

#include <Adafruit_MCP4728.h>
#include <Wire.h>

Adafruit_MCP4728 mcp;


float tuning[37];
float voltrange = 4.85;  // measured this, probably not accurate
float octave = 4096.0 / voltrange; // number of DAC steps in an octave


int note = 0;

// int pitch[] = { 8, 4, 5, -1, 4, 3, -1, 2, 3, 4, -1, 6, 3, 4, 5, -1 };
// float dur[] = { 0.5,0.5,0.5,0.5,0.25,0.25,0.25,0.25,0.5,0.5,0.5,0.5,0.25,0.25,0.25,0.25,0.25, };

int pitch[] = { 12, -1, 11, -1, 12, -1, 15, -1, 12, -1, 11, -1, -1, -1, -1, -1  };
float dur[] = { 2, 0, 2, 0, 2, 0, 2, 0, 2, 0, 2, 0, 2, 0, 2, 0 };


int phrase = 16;

int s;
int beat_m = 1000; // fix me coordinate with timer code
bool noteon = false;
int beat = false;
long notestart, notedur;


void setup() {
  Serial.begin(115200);


  cli();

//set timer1 interrupt at 1Hz
  TCCR1A = 0;// set entire TCCR1A register to 0
  TCCR1B = 0;// same for TCCR1B
  TCNT1  = 0;//initialize counter value to 0
  // set compare match register for 1hz increments
  //OCR1A = 15624;// = (16*10^6) / (1*1024) - 1 (must be <65536)
  //OCR1A = 7812;// = (16*10^6) / (1*1024) - 1 (must be <65536)
  //OCR1A = 15624;
  OCR1A = 48000;
  // turn on CTC mode
  TCCR1B |= (1 << WGM12);
  // Set CS10 and CS12 bits for 1024 escaler
  TCCR1B |= (1 << CS12) | (1 << CS10);  
  // enable timer compare interrupt
  TIMSK1 |= (1 << OCIE1A);

  sei();



  if (!mcp.begin(0x64)) {
    while (1) {
      delay(100);
    }
  }

  // randomSeed(analogRead(A0));
  mcp.setSpeed(800000L);
  make_tuning(12);
  note=0;
  Serial.println("hello");
}

void make_tuning(int edo) {
  float n0 = 0;
  float edof = (float)edo;
  for( int i = 0; i < 37; i++ ) {
      tuning[i] = round(n0 + octave * (float)i / edof);
  }

}



ISR(TIMER1_COMPA_vect){ // called once every note
  beat = true;
}



void loop() {
  long now = millis();
  if( beat ) {
    beat = false;
    if( pitch[s] > -1 ) {
      notestart = millis();
      notedur = round(beat_m * dur[s]);
      noteOn(pitch[s]);
      noteon = true;
    }
    s += 1;
    if( s == phrase ) {
      s = 0;
    }
  } else {
    if( noteon ) {
      if( now - notestart > notedur ) {
        noteOff();
        noteon = false;
      }
    }
  }
}


void noteOn(int note) {
  if( note > -1 ) {
    mcp.setChannelValue(MCP4728_CHANNEL_A, tuning[note]);
    mcp.setChannelValue(MCP4728_CHANNEL_B, 4095);
  }
}

void noteOff() {
    Serial.println("off");
    mcp.setChannelValue(MCP4728_CHANNEL_B, 0);
}