// Better sequencer which uses interrupts

#include <Adafruit_MCP4728.h>
#include <Wire.h>

Adafruit_MCP4728 mcp;


float tuning[37];
float voltrange = 4.85;  // measured this, probably not accurate
float octave = 4096.0 / voltrange; // number of DAC steps in an octave


int note = 0;

// kick
// int pitch[] = { 8, -1, -1, -1, 8,-1, -1, -1, 8,-1, -1, -1, 8, -1, -1, 8, 
//                 8, -1, -1, -1, 8,-1, -1, -1, -1,-1, 8, -1, -1, 8, -1, 8,
// };
// float dur[] = { 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
// 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, };


// hi hat
// int pitch[] = { 8, 8, -1, 8, 8, 8, -1, 8, 8,8 , -1, 8, 8, 8, -1, 8, 
//                 8, 8, -1, 8, 8, 8, -1, 8, 8,8 , -1, 8, 8, 8, 8, 8, 
// };
// float dur[] = { 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
// 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, };

// bass triggers

int pitch[] = { 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 1, -1, -1, -1, 
                1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 1, -1, -1, -1, };
                
float dur[] = { 8, 1, 1,1,  1,1,1,1,  1,1,1,1, 4, 1,1,1,
8, 1, 1,1,  1,1,1,1,  1,1,1,1, 4, 1,1,1,};


int phrase = 32;

int s;
int bpm = 110;
int beat_m = 100; // fix me coordinate with timer code
bool noteon = false;
int beat = false;
long notestart, notedur;


void setup() {
  Serial.begin(115200);

  float freqint = 60.0 / (float)bpm;

  int ocr = round(16 * 10 ^ 6 / (1024.0 * freqint * 16)) - 1

  Serial.println(ocr);

  if( ocr < 65536 ) {

    cli();



  //set timer1 interrupt at 1Hz
    TCCR1A = 0;// set entire TCCR1A register to 0
    TCCR1B = 0;// same for TCCR1B
    TCNT1  = 0;//initialize counter value to 0
    // set compare match register for 1hz increments
    //OCR1A = 15624;// = (16*10^6) / (1*1024) - 1 (must be <65536)
    //OCR1A = 7812;// = (16*10^6) / (1*1024) - 1 (must be <65536)
    OCR1A = ocr; 
    // turn on CTC mode
    TCCR1B |= (1 << WGM12);
    // Set CS10 and CS12 bits for 1024 escaler
    TCCR1B |= (1 << CS12) | (1 << CS10);  
    // enable timer compare interrupt
    TIMSK1 |= (1 << OCIE1A);

    sei();

  } else {
    Serial.println("BPM out of range")
  }

  if (!mcp.begin(0x64)) {
    while (1) {
      delay(100);
    }
  }

  // randomSeed(analogRead(A0));
  mcp.setSpeed(800000L);
  make_tuning(7);
  note=0;
}

void make_tuning(int edo) {
  float n0 = 0;
  float edof = (float)edo;
  for( int i = 0; i < 37; i++ ) {
      tuning[i] = round(n0 + octave * (float)i / edof);
  }

}

float mod_f(int x) {
  return 1 - sq((float)x / 1000.0);
}



ISR(TIMER1_COMPA_vect){ // called once every note
  beat = true;
}



void loop() {
  float mod;
  int o;
  long now = millis();
  if( beat ) {
    beat = false;
    if( pitch[s] > -1 ) {
      notestart = millis();
      notedur = round(beat_m * dur[s]);
      noteOn(pitch[s]);
      noteon = true;
    }
    s += 1;
    if( s == phrase ) {
      s = 0;
    }
  } else {
    if( noteon ) {
        mod = mod_f(now - notestart);
        o = round(mod * 4095.0);
        if( o > 4095 ) {
          o = 4095;
        }
        if( o < 0 ) {
          o = 0;
        } 
        mcp.setChannelValue(MCP4728_CHANNEL_C, o);
      if( now - notestart > notedur ) {
        noteOff();
        noteon = false;
      }
    }
  }
}


void noteOn(int note) {
  if( note > -1 ) {
    mcp.setChannelValue(MCP4728_CHANNEL_A, tuning[note]);
    mcp.setChannelValue(MCP4728_CHANNEL_B, 4095);
  }
}

void noteOff() {
    Serial.println("off");
    mcp.setChannelValue(MCP4728_CHANNEL_B, 0);
}