Fibomod/Fibomod.ino

@@ -6,17 +6,12 @@
 
 Adafruit_MCP4728 mcp;
 
-#define nsamp 1500
+#define nsamp 256
 #define dacmax 256
 
 unsigned int phase = 0;
-unsigned int fibo = 3;
+unsigned int fibo = 20;
 unsigned int scale = 0;
-unsigned int fibi = 0;
-unsigned int pmax = nsamp;
-
-unsigned int fibosort[] = { 4,3,11,8,29,7,21,19,38,76,5,55,199,6,9,12,16,18,24,36,48,72,144,13,22,31,44,62,124,47,141,17,34,68,136,152,15,33,41,123,165,205,58,116,211,89,139,14,23,28,32,42,46,56,63,69,84,92,96,112,126,138,161,168,184,207,224,252,101,151,233,39,87,59,10,20,40,61,88,110,122,155,220,244,248,71,27,51,54,57,102,107,108,114,153,171,204,214,216,228,37,113,79,158,35,77,105,231,26,52,104,232,43,129,181,209,64,94,188,192,25,53,106,109,212,218,121,49,91,147,203,229,30,45,60,66,80,82,90,93,99,120,132,164,176,180,183,186,198,240,246,131,178,67,201,65,143,145,119,133,189,238,73,149,202,111,235,78,83,117,156,166,174,208,234,249,118,236,179,85,95,170,187,190,191,128,97,75,103,142,81,159,162,74,148,226,177,239,70,115,140,154,160,210,217,230,241,253,251,221,247,127,86,172,137,195,213,219,50,100,200,237,157,163,242,98,167,182,196,173,135,255,169,185,193,197,175,134,130,215,146,223,222,227,125,245,194,150,225,206,243,254,250 };
-
 
 byte waveform[nsamp];
 
@@ -31,7 +26,7 @@ void setup() {
   // set compare match register for 1hz increments
   //OCR1A = 15624;// = (16*10^6) / (1*1024) - 1 (must be <65536)
   //OCR1A = 7812;// = (16*10^6) / (1*1024) - 1 (must be <65536)
-  OCR1A = 2000;
+  OCR1A = 10000;
   // turn on CTC mode
   TCCR1B |= (1 << WGM12);
   // Set CS10 and CS12 bits for 1024 prescaler
@@ -42,7 +37,6 @@ void setup() {
   sei();
 
 
-
   Serial.begin(115200);
 
   if (!mcp.begin(0x64)) {
@@ -56,46 +50,38 @@ void setup() {
   for( int i = 0; i < nsamp; i++ ) {
     waveform[i] = 1;
   }
-  fibo = fibosort[fibi];
-  setwave();
-}
 
-void setwave(){
-  waveform[0] = 0;
-  waveform[1] = 1;
-  fibo = fibosort[fibi];
-  Serial.println(fibo);
-  pmax = nsamp;
-  for (int i=2; i<nsamp; ++i){
-    waveform[i] = (waveform[i - 1] + waveform[i - 2]) % fibo;
-    if( waveform[i - 1] == 0 && waveform[i] == 1 ) {
-      pmax = i - 1;
-      break;
-    }
-  }
-  Serial.println(pmax);
-  float scale = 256 / fibo;
-  for( int i = 0; i < nsamp; ++i ) {
-    waveform[i] *= scale;
-  }
 }
 
 ISR(TIMER1_COMPA_vect){//timer1
-  fibi++;
+  unsigned int flog;
-  if( fibi == 128 ) {
+  scale = 10;
-    fibi = 0;
+  fibo = 3 + analogRead(A0) >> 2;
+  flog = fibo;
+  while( flog ) {
+    flog = flog >> 1;
+    scale -= 1;
+  }
+  Serial.println(fibo);
+  Serial.println(scale);
+  Serial.println(fibo << scale);
 }
-  Serial.println("Setting wave");
 
-  setwave();
-  phase = 0;
-}
 
 
 void loop() {
-  mcp.fastWrite(waveform[phase] << 4, 0, 0, 0);
+  int p0 = phase - 1;
+  int p1 = phase + 2;
+  if( p0 < 0 ) {
+    p0 += nsamp;
+  }
+  if( p1 < 0 ) {
+    p1 += nsamp;
+  }
+  waveform[phase] = (waveform[p1] + waveform[p0]) % fibo;
+  mcp.fastWrite(waveform[phase] << scale, 0, 0, 0);
   phase += 1;
-  if( phase == pmax ) {
+  if( phase >= nsamp ) {
     phase = 0;
   }
 }

Fibomod2/Fibomod2.ino

@@ -1,63 +0,0 @@
-// can fibomod make an interesting noise?
-
-
-#include <Adafruit_MCP4728.h>
-#include <Wire.h>
-
-Adafruit_MCP4728 mcp;
-
-
-unsigned int fibo = 43;
-unsigned int a = 0;
-unsigned int b = 1;
-
-void setup() {
-
-  cli();
-
-//set timer1 interrupt at 1Hz
-  TCCR1A = 0;// set entire TCCR1A register to 0
-  TCCR1B = 0;// same for TCCR1B
-  TCNT1  = 0;//initialize counter value to 0
-  // set compare match register for 1hz increments
-  //OCR1A = 15624;// = (16*10^6) / (1*1024) - 1 (must be <65536)
-  //OCR1A = 7812;// = (16*10^6) / (1*1024) - 1 (must be <65536)
-  OCR1A = 1000;
-  // turn on CTC mode
-  TCCR1B |= (1 << WGM12);
-  // Set CS10 and CS12 bits for 1024 prescaler
-  TCCR1B |= (1 << CS12) | (1 << CS10);  
-  // enable timer compare interrupt
-  TIMSK1 |= (1 << OCIE1A);
-
-  sei();
-
-
-
-  Serial.begin(115200);
-
-  if (!mcp.begin(0x64)) {
-    while (1) {
-      delay(100);
-    }
-  }
-
-  mcp.setSpeed(800000L);
-
-}
-
-
-ISR(TIMER1_COMPA_vect){
-  fibo = analogRead(A0);
-  if( fibo < 3 )
-  Serial.println(fibo);
-}
-
-
-void loop() {
-  unsigned int c = (a + b) % fibo;
-  a = b;
-  b = c;
-  mcp.fastWrite(a << 2, 0, 0, 0);
-}
-

Karplus_Strong/Karplus_Strong.ino

@@ -15,9 +15,10 @@ unsigned int phase;
 unsigned int length;
 unsigned int repeats;
 int note = 0;
+//int freqs[] = { 256, 228, 205, 192, 171, 154, 137, 128, 114, 102, 96, 85, 77, 68, 64 };
+//int freqs[] = { 128, 114, 102, 96, 85, 77, 68, 64, 56, 51, 48, 42, 38, 34, 32 };
 int freqs[] = { 64, 56, 51, 48, 42, 38, 34, 32, 28, 25, 24, 21, 19, 17, 16  };
-int tune2[] = { 2, -1, -1, 2, -1, -1, 3, -1, 2, -1, -1, -1, 0, -1, -1, -1 };
+int tune[] = { 0, 4, 3, 5, -1, -1, -1, -1 };
-//int tune2[] = { 2, -1, -1, -1, -1, -1, -1, -1, 2, -1, -1, -1, 4, -1, -1, -1 };
 
 byte waveform[nsamp];
 
@@ -34,10 +35,10 @@ void setup() {
   // set compare match register for 1hz increments
   //OCR1A = 15624;// = (16*10^6) / (1*1024) - 1 (must be <65536)
   //OCR1A = 7812;// = (16*10^6) / (1*1024) - 1 (must be <65536)
-  OCR1A = 2000;
+  OCR1A = 10000;
   // turn on CTC mode
   TCCR1B |= (1 << WGM12);
-  // Set CS10 and CS12 bits for 1024 escaler
+  // Set CS10 and CS12 bits for 1024 prescaler
   TCCR1B |= (1 << CS12) | (1 << CS10);  
   // enable timer compare interrupt
   TIMSK1 |= (1 << OCIE1A);
@@ -45,6 +46,7 @@ void setup() {
   sei();
 
 
+  Serial.begin(115200);
 
   if (!mcp.begin(0x64)) {
     while (1) {
@@ -60,17 +62,18 @@ void setup() {
 }
 
 ISR(TIMER1_COMPA_vect){//timer1
-  if( tune2[note] > -1 ) {
+  if( tune[note] > -1 ) {
-    length=freqs[tune2[note]];
+    length=freqs[tune[note]];
     for (int i=0; i<nsamp; ++i){  
       waveform[i]=random(256);
     }
   }
   note++;
-  if( note > 15 ) {
+  if( note > 7 ) {
     note = 0;
   }
   pd = analogRead(A0) >> 4;
+  Serial.println(pd);
 }