61828a12e9
Handle user mode changes
2020-03-22 11:26:16 -04:00
8da45d9183
Rewrite handleMode
2020-03-22 11:18:21 -04:00
1c508b78ab
Handle RPL_UMODEIS
2020-03-18 08:33:42 -04:00
1d5c4a5e34
Send blank line after 10 minutes idle
...
Without this, I was having catgirl "time out" from pounce's POV, but
without catgirl noticing anything... I still don't understand this. Been
using this fix for a couple weeks though and it stopped happening, and
it's otherwise harmless, but yikes.
2020-03-17 11:58:50 -04:00
2f53f75892
Ignore 422 ERR_NOMOTD
...
pounce will start sending these because some silly clients don't think
they're connected until some MOTD reply...
2020-03-09 03:08:59 -04:00
7e120f00a1
Set self.pos before handling the message
...
This intuitively feels wrong, but isn't. Most importantly, handleError
immediately exits, but we still need to "consume" that message,
otherwise pounce will keep sending it on reconnect. The same goes for
any other handler that might cause an exit, such as a require parameter
count failure.
2020-03-08 23:15:56 -04:00
5c167e4181
Prevent entering commands in <debug> if restricted
...
Because the <debug> ID always exists, it's possible to create a window
for it even while restricted with "/window <debug>" and try to enter
commands there.
2020-03-02 19:18:55 -05:00
8570a62235
Implement the causal.agency/consumer capability
2020-02-29 01:03:46 -05:00
78b4832bfe
Add raw modes to mode message
2020-02-25 03:00:36 -05:00
e9524b4af3
Handle changing setParamModes, paramModes and other channel modes
2020-02-25 02:54:15 -05:00
431945614d
Fix handling EXCEPTS and INVEX without values
2020-02-25 02:24:29 -05:00
3c5e1c95a4
Add /mode, /except, /invex and handle lists replies
2020-02-25 02:12:35 -05:00
c3c40d738b
Accumulate mode changes into a buffer for one message
2020-02-23 22:44:19 -05:00
9609723dc6
Handle ERR_CHANOPRIVSNEEDED
2020-02-20 05:04:58 -05:00
50a6d34a55
Handle MODE changing channel list modes
2020-02-20 04:53:06 -05:00
c2c8595012
Handle MODE setting channel prefix modes
2020-02-20 04:18:25 -05:00
a5cd2cd97a
Just use "b" to query ban list
2020-02-20 03:48:26 -05:00
a3b6d5d9a7
Change ban list formatting
2020-02-20 03:44:57 -05:00
b3c5458fc9
Rearrange some handlers
2020-02-20 03:18:48 -05:00
42ad42887c
Handle RPL_INVITING when no invite-notify
2020-02-20 02:32:36 -05:00
5c79b16a51
Handle ERR_BANLISTFULL
2020-02-20 02:13:23 -05:00
1b01045bf0
Add handlers for user-in-channel errors
2020-02-20 01:52:58 -05:00
f494fe6edb
Add generic error reply handler
...
This should have been in way earlier...
2020-02-20 01:38:31 -05:00
56de4668ac
Add /ban, /unban and handle ban list replies
2020-02-19 21:47:16 -05:00
2a33ee68dd
Format WHOIS signon date with %F %T
2020-02-19 21:29:51 -05:00
d5c4e7e371
Apply word wrapping to tabs before setting align
...
This fixes long URLs right after the initial \t being wrapped and line
counted incorrectly.
2020-02-19 20:31:29 -05:00
ab94728913
Remove bad continues in styleParse loops
...
Since we're sometimes manually doing spaces that need the right styling.
2020-02-19 02:11:17 -05:00
026a8ca979
Various small cleanup in ui.c
2020-02-19 01:18:09 -05:00
460207440b
Use the correct hostname in error message
...
Previously, the remote host to which catgirl(1) is connecting was used
in error reporting instead of the local bind address if the latter could
not be resolved.
2020-02-17 23:07:29 -05:00
6be9aa9901
Increase buffer size to 1024
2020-02-17 23:06:37 -05:00
079bbda246
Accept Shift-M-0 through Shift-M-9 as well
...
This mostly just to accommodate my inverted keyboard layout.
2020-02-17 12:27:07 -05:00
cf83e95114
Only scroll after reflow if necessary
...
If we've already filled up every line of the window, there is no need to
scroll.
2020-02-17 11:57:29 -05:00
fa29c37911
Scroll the window only once during reflow
...
ncurses implements scrolling as a memmove of the array of lines
pointers, which happens each time a line is added to the bottom of the
window, causing a scroll. This would get noticeably slow if WindowLines
were increased to just 1024. Should've used a ring buffer, I think.
2020-02-17 11:49:56 -05:00
b20be7cbad
Various small cleanups
...
Haven't really gone through ui.c yet.
2020-02-16 23:05:43 -05:00
ba524ed804
Replace a lot of snprintf with a catf implementation
2020-02-16 19:12:19 -05:00
3885dd5231
Add 379 to WHOIS responses
2020-02-16 18:42:38 -05:00
edd8855418
Track EXCEPTS and INVEX modes
2020-02-16 18:31:50 -05:00
09cd9a300f
Add RFC 1459 and modern.ircdocs.horse references
...
It's ridiculous but I really am looking at all three.
2020-02-16 18:16:29 -05:00
5ce9ec70b6
Re-sort STANDARDS section
...
Just do it by dumb alphabetic to make it easier to maintain.
2020-02-16 18:10:40 -05:00
f84ab67311
Apply colorMentions to actions
...
The first-two-words branch works well for "/me verbs nick".
2020-02-16 05:22:28 -05:00
fa4e81d480
Set defaults for various types of modes
...
These are actually from RFC 1459, since that seems to be the more likely
lowest common denominator, so I should maybe it it to STANDARDS (along
with ircdocs' section on ISUPPORT). RFC 2812 has a lot of stuff that
isn't currently used.
2020-02-15 22:59:04 -05:00
700b5d5870
Replace small integers in size_t with uint
2020-02-15 22:19:55 -05:00
83df94b359
Still add nick without prefixes to complete
2020-02-15 22:19:05 -05:00
9b1ab69908
Track PREFIX modes and CHANMODES
2020-02-15 05:29:54 -05:00
cd341076c0
Show prefixes in NAMES and WHOIS replies
2020-02-15 05:04:43 -05:00
a91e5fc805
Enable multi-prefix
2020-02-15 04:59:50 -05:00
42d106260b
Separate network info from self
2020-02-15 04:54:53 -05:00
91fa136672
Add /ns and /cs
2020-02-15 04:47:46 -05:00
357ded8958
Document exit status
2020-02-15 04:28:57 -05:00
ed52ade739
Add /kick
2020-02-14 21:43:27 -05:00
C. McEnroe
multiplexd