94fb9798c5
Bump ParamCap to 254
...
Apparently IRCds have decided that the 15-parameter limit doesn't matter
anymore. 254 is the maximum number of single-byte parameters (following
a single-byte command) which fit in a 512-byte CR-LF-terminated line.
When everyone decides that the 512-byte line length limit doesn't matter
either, I will delete my software and people can use some JavaScript
garbage instead.
This makes struct Message 2080 bytes, but there's only ever one or two
of them around at once. Avoid passing it by value to handle.
2020-06-24 13:36:24 -04:00
4fb94a1a22
Color mentions up to first ": " rather than just ":"
...
Avoids coloring everything up to a ":)".
2020-06-16 23:14:07 -04:00
721c3a9ee6
Add additional permission for linking with LibreSSL
...
https://www.gnu.org/licenses/gpl-faq.en.html#GPLIncompatibleLibs
2020-06-08 17:48:07 -04:00
73bda18110
Check ignores against id
...
Otherwise they do not work correctly for QUIT and NICK. This also lets
you ignore private messages only by putting the nick in the third field.
2020-04-07 13:18:42 -04:00
1969c9125f
Error on missing MODE parameters
2020-04-05 13:17:38 -04:00
bb531a71b1
Error on invalid ISUPPORT values
2020-04-05 13:11:19 -04:00
75a6aa9258
Use gnu-case-range and gnu-conditional-omitted-operand extensions
...
I'm sad to do this but I just can't stand writing (foo ? foo : bar)
anymore.
2020-04-03 17:10:52 -04:00
25f419465f
Add /ignore message filtering patterns
2020-03-31 14:30:42 -04:00
ff78362826
Replace some declaration; while loops with for loops
...
I should have been using this for getopt loops already but the call here
is slightly too long to fit on one line as a for loop.
2020-03-30 19:44:45 -04:00
bb2f3c7a01
Rewrite mode formatting again and write to log
...
Going back to one line per mode change again because it's easier.
2020-03-28 12:08:10 -04:00
3dc998272e
Log chat events
...
Still missing is logging MODE changes, which will be hell, unless it
just logs the raw stuff.
2020-03-25 18:58:48 -04:00
4f40ace9d4
Track MODE in replies
2020-03-23 16:52:24 -04:00
cf1545870a
Assume worst case for unknown user and host in splitMessage
...
The default USERLEN of 9 doesn't have a great source, the RFC only says
that nicks are length 9, so my assumption is that usernames are not
longer.
2020-03-23 13:25:10 -04:00
eb6316c235
Track own host, handle CHGHOST
2020-03-22 14:32:20 -04:00
0d0a6d1575
Handle RPL_CHANNELMODEIS
2020-03-22 11:40:58 -04:00
61828a12e9
Handle user mode changes
2020-03-22 11:26:16 -04:00
8da45d9183
Rewrite handleMode
2020-03-22 11:18:21 -04:00
1c508b78ab
Handle RPL_UMODEIS
2020-03-18 08:33:42 -04:00
2f53f75892
Ignore 422 ERR_NOMOTD
...
pounce will start sending these because some silly clients don't think
they're connected until some MOTD reply...
2020-03-09 03:08:59 -04:00
7e120f00a1
Set self.pos before handling the message
...
This intuitively feels wrong, but isn't. Most importantly, handleError
immediately exits, but we still need to "consume" that message,
otherwise pounce will keep sending it on reconnect. The same goes for
any other handler that might cause an exit, such as a require parameter
count failure.
2020-03-08 23:15:56 -04:00
8570a62235
Implement the causal.agency/consumer capability
2020-02-29 01:03:46 -05:00
78b4832bfe
Add raw modes to mode message
2020-02-25 03:00:36 -05:00
e9524b4af3
Handle changing setParamModes, paramModes and other channel modes
2020-02-25 02:54:15 -05:00
431945614d
Fix handling EXCEPTS and INVEX without values
2020-02-25 02:24:29 -05:00
3c5e1c95a4
Add /mode, /except, /invex and handle lists replies
2020-02-25 02:12:35 -05:00
c3c40d738b
Accumulate mode changes into a buffer for one message
2020-02-23 22:44:19 -05:00
9609723dc6
Handle ERR_CHANOPRIVSNEEDED
2020-02-20 05:04:58 -05:00
50a6d34a55
Handle MODE changing channel list modes
2020-02-20 04:53:06 -05:00
c2c8595012
Handle MODE setting channel prefix modes
2020-02-20 04:18:25 -05:00
a3b6d5d9a7
Change ban list formatting
2020-02-20 03:44:57 -05:00
b3c5458fc9
Rearrange some handlers
2020-02-20 03:18:48 -05:00
42ad42887c
Handle RPL_INVITING when no invite-notify
2020-02-20 02:32:36 -05:00
5c79b16a51
Handle ERR_BANLISTFULL
2020-02-20 02:13:23 -05:00
1b01045bf0
Add handlers for user-in-channel errors
2020-02-20 01:52:58 -05:00
f494fe6edb
Add generic error reply handler
...
This should have been in way earlier...
2020-02-20 01:38:31 -05:00
56de4668ac
Add /ban, /unban and handle ban list replies
2020-02-19 21:47:16 -05:00
2a33ee68dd
Format WHOIS signon date with %F %T
2020-02-19 21:29:51 -05:00
ba524ed804
Replace a lot of snprintf with a catf implementation
2020-02-16 19:12:19 -05:00
3885dd5231
Add 379 to WHOIS responses
2020-02-16 18:42:38 -05:00
edd8855418
Track EXCEPTS and INVEX modes
2020-02-16 18:31:50 -05:00
f84ab67311
Apply colorMentions to actions
...
The first-two-words branch works well for "/me verbs nick".
2020-02-16 05:22:28 -05:00
700b5d5870
Replace small integers in size_t with uint
2020-02-15 22:19:55 -05:00
83df94b359
Still add nick without prefixes to complete
2020-02-15 22:19:05 -05:00
9b1ab69908
Track PREFIX modes and CHANMODES
2020-02-15 05:29:54 -05:00
cd341076c0
Show prefixes in NAMES and WHOIS replies
2020-02-15 05:04:43 -05:00
42d106260b
Separate network info from self
2020-02-15 04:54:53 -05:00
39a343980b
Add /invite
2020-02-14 21:36:58 -05:00
8aa6dd86f6
Add /away
2020-02-14 21:10:40 -05:00
be08880fac
Only exit on errorneous nick during registration
2020-02-12 19:30:07 -05:00
05579773c8
Add 378 to list of WHOIS responses
...
It's the one (from freenode anyway) that tells you where you're
connecting from.
2020-02-12 19:14:49 -05:00
C. McEnroe