06683aa4e3
Use Warm heat for blank lines
...
So they're not hidden by M-+.
2021-01-17 00:35:59 -05:00
1a1fe1fb7a
Save and load window visibility thresholds
2021-01-16 13:09:55 -05:00
43b1dba720
Restore toggling ignore with M--
...
So that pressing M-- repeatedly maintains the previous behavior.
2021-01-16 13:05:01 -05:00
d05872303e
Generalize ignore toggling to visibility threshold
2021-01-16 12:58:16 -05:00
51c92f94ff
Save and load the URL ring in the save file
2021-01-11 18:05:22 -05:00
59006d18bb
Avoid eating C-c while connecting
...
Split UI initialization into two steps either side of the call to
connect, so that C-c works as interrupt while it's blocked.
2020-10-12 19:25:08 -04:00
c48672313b
Factor out styleStrip
2020-10-09 18:45:52 -04:00
ef59e235eb
Silence set-but-unused warning
...
getyx is so annoying this way.
2020-09-09 18:04:41 -04:00
cf42595515
Add blank line to unread if there are already unread
...
This fixes the inconsistent M-u behaviour when catgirl is restarting and
reconnecting to pounce, for example.
2020-09-07 22:21:41 -04:00
4ca49debb1
Call uiWrite to insert blank lines
...
It only used to use different code to avoid adding the blank line to the
soft buffer.
2020-09-07 22:13:09 -04:00
f0fe44f355
Add C-r, C-s for basic scrollback search
2020-09-06 20:40:29 -04:00
49e626b2f3
Add M-n, M-p to jump to highlights
2020-09-03 16:37:31 -04:00
dbc0c3ef40
Fix M-u behaviour difference before and after reflow
2020-09-03 15:50:39 -04:00
0968a8ac7c
Recalculate unreadHard on reflow
2020-09-02 21:29:03 -04:00
a46fbea0ec
Give blank lines timestamps
...
Otherwise the zero timestamps totally break save data loading! Bad!
2020-09-02 19:31:05 -04:00
96386adac3
Hide ignored messages at the soft -> hard buffer layer
...
This restores normal scrolling behaviour.
2020-09-02 18:51:07 -04:00
99612ad8eb
Still add ignored lines to unreadHard
...
Scrolling is still affected by hidden lines (which I'm not sure yet is
good or not), so for M-u to work it needs to count ignored lines.
2020-09-02 16:52:57 -04:00
d00b3d3b70
Actually insert blank lines in the soft buffer
...
So they can be preserved forever!
2020-09-02 16:29:38 -04:00
9679c7474e
Reimplement split scrolling
2020-09-02 16:06:34 -04:00
a0c8a46c75
Fix inserting blank lines BEFORE the new message
2020-09-02 15:57:36 -04:00
6fe5368ec7
Only call windowUpdate when the shown window needs updating
2020-09-02 15:50:13 -04:00
17898622e3
Call wclear on resize
...
Otherwise artefects can appear when resizing to smaller width with wide
characters at the right edge of the window.
2020-09-02 02:18:04 -04:00
a84c9cdda7
Fix line wrapping in various ways
...
Never split a codepoint, don't set wrapping point unless we're not
already wrapping, wrap on any unicode whitespace, only clear rest of
line if still on the same line...
2020-09-02 01:57:51 -04:00
149cafc5ab
Render one main window from buffers
...
Still missing: split scrolling and preserving a blank on reflow either
from resize or ignore toggling.
Anecdata: on one of my instances of catgirl, RAM usage of the previous
release was ~30M, RAM usage of this commit was ~12M.
2020-09-02 00:27:16 -04:00
8d1d758053
Invert meaning of unreadHard/unreadSoft to match new buffer code
...
Not sure why I had named them this way. Hard means hard-wrapped.
2020-09-01 20:56:09 -04:00
ded2b6afb6
Factor buffer out of ui
...
In preparation for doing line wrapping outside of ncurses.
2020-09-01 20:36:50 -04:00
a98fd70aac
Move styleParse out of ui
2020-09-01 18:05:17 -04:00
814c36223a
Say "OpenSSL" in additional permission notices
...
LibreSSL is "a modified version of that library".
2020-08-04 12:19:14 -04:00
4c1b1fc6a3
Replace catf with something that tracks len
...
Also the old catf would be broken with -DNDEBUG oops!
2020-07-30 14:37:46 -04:00
ed7d5c0f34
Initialize numHot, numWarm
...
For some reason gcc thinks that numWarm might be used uninitialized.
It's fine with numHot though, strangely.
2020-07-23 00:22:36 -04:00
787771bebb
Keep scrolled up windows in status line
2020-07-12 09:38:52 -04:00
e8f1b928b7
Call static_assert by _Static_assert
...
OpenBSD assert.h does not #define static_assert, and this is the only
thing that prevents catgirl from compiling without any issues there.
2020-06-11 15:33:59 -04:00
721c3a9ee6
Add additional permission for linking with LibreSSL
...
https://www.gnu.org/licenses/gpl-faq.en.html#GPLIncompatibleLibs
2020-06-08 17:48:07 -04:00
88e2197a8f
Don't send zero-width characters to ncurses
2020-05-26 15:18:55 -04:00
b352f5965b
Define constants for window geometry
...
Also fixes uiDraw so that the split lines and marker don't overlap the
main window, although that wasn't causing any real problems.
2020-05-25 13:51:09 -04:00
53f206f7e0
Tweak status line formatting
2020-05-24 12:34:23 -04:00
d8ef021506
Fix page scrolling distance for SplitLines
2020-05-14 16:56:07 -04:00
a632ee741b
Don't clobber windows.swap in else of showAuto
2020-04-20 16:12:02 -04:00
2f5ff45db0
Save last user-selected window to switch back to from M-a
2020-04-19 21:13:02 -04:00
98cbb44c0d
Add M-= to mute windows
2020-04-15 16:18:09 -04:00
470dee97c3
Add status indicator for showing ignored messages
2020-04-15 15:54:55 -04:00
9bc52d7238
Add M-< and M-> for scroll to top and bottom
...
Mirrored by S-Home and S-End but I guess I'm not documenting those...
2020-04-07 14:09:29 -04:00
7d62762609
Revert "Add C-o as alias of M-/"
...
This reverts commit 3a156540b8
2020-04-07 13:59:54 -04:00
83a2fb0d34
Reset unreadSoft only on first unreadHard
...
Also rename unread{,Lines} to be maybe more clear and disambiguate with
buffer lines.
2020-04-07 11:06:29 -04:00
e3f7362241
Add M-q to collapse whitespace
2020-04-07 10:48:44 -04:00
241fefd976
Add scroll position to status line
2020-04-06 14:34:32 -04:00
62a3e3699c
Implement split scrolling
2020-04-06 13:46:35 -04:00
75a6aa9258
Use gnu-case-range and gnu-conditional-omitted-operand extensions
...
I'm sad to do this but I just can't stand writing (foo ? foo : bar)
anymore.
2020-04-03 17:10:52 -04:00
a0f012c614
Do not add an extra blank line on uiLoad
...
Adding one for the last unread position now, so this is mostly
redundant, I think.
2020-04-02 11:00:05 -04:00
9063c656d5
Preserve the last blank line on reflow
2020-04-02 10:56:33 -04:00
6333b63224
Switch to windows with ascending unread counts on M-a
2020-04-02 10:47:17 -04:00
ca751a1cdc
Hide filtered messages
2020-03-31 14:31:10 -04:00
fcb6e2909f
Save and load buffer line heat
2020-03-31 14:12:43 -04:00
bfa106b9a0
Store line heat in buffer
2020-03-31 14:07:21 -04:00
ff78362826
Replace some declaration; while loops with for loops
...
I should have been using this for getopt loops already but the call here
is slightly too long to fit on one line as a for loop.
2020-03-30 19:44:45 -04:00
a0dde10cb6
Add text macros
2020-03-30 14:56:26 -04:00
ef6518a627
Add M-Enter to insert a newline
2020-03-23 15:03:55 -04:00
60b189200e
Handle bracketed paste, including newlines
2020-03-23 14:55:43 -04:00
8570a62235
Implement the causal.agency/consumer capability
2020-02-29 01:03:46 -05:00
d5c4e7e371
Apply word wrapping to tabs before setting align
...
This fixes long URLs right after the initial \t being wrapped and line
counted incorrectly.
2020-02-19 20:31:29 -05:00
ab94728913
Remove bad continues in styleParse loops
...
Since we're sometimes manually doing spaces that need the right styling.
2020-02-19 02:11:17 -05:00
026a8ca979
Various small cleanup in ui.c
2020-02-19 01:18:09 -05:00
6be9aa9901
Increase buffer size to 1024
2020-02-17 23:06:37 -05:00
079bbda246
Accept Shift-M-0 through Shift-M-9 as well
...
This mostly just to accommodate my inverted keyboard layout.
2020-02-17 12:27:07 -05:00
cf83e95114
Only scroll after reflow if necessary
...
If we've already filled up every line of the window, there is no need to
scroll.
2020-02-17 11:57:29 -05:00
fa29c37911
Scroll the window only once during reflow
...
ncurses implements scrolling as a memmove of the array of lines
pointers, which happens each time a line is added to the bottom of the
window, causing a scroll. This would get noticeably slow if WindowLines
were increased to just 1024. Should've used a ring buffer, I think.
2020-02-17 11:49:56 -05:00
b20be7cbad
Various small cleanups
...
Haven't really gone through ui.c yet.
2020-02-16 23:05:43 -05:00
ba524ed804
Replace a lot of snprintf with a catf implementation
2020-02-16 19:12:19 -05:00
700b5d5870
Replace small integers in size_t with uint
2020-02-15 22:19:55 -05:00
42d106260b
Separate network info from self
2020-02-15 04:54:53 -05:00
0d23f8f1b8
Save heat, unreadTotal, unreadWarm
2020-02-14 05:20:22 -05:00
fbdfb36085
Track unreadTotal and unreadWarm separately
...
Otherwise reflow's calculation of unreadLines is always going to be
wrong if there were Cold lines interspersed.
2020-02-14 05:19:33 -05:00
3b257a55c3
Set hidden to true initially
...
Otherwise uiShow in uiInit does nothing, of course.
2020-02-13 22:32:35 -05:00
4405b89f6c
Only uiShow if hidden and only uiHide if shown
2020-02-13 22:09:25 -05:00
1e226593ef
Rename procPipe to utilPipe
2020-02-13 21:57:55 -05:00
a6bc2ea7c3
Set swap correctly when closing a window
...
I knew I missed something.
2020-02-13 05:10:55 -05:00
92ccabaafd
Refactor windows into array and add /move
...
Oof.
2020-02-13 05:05:53 -05:00
180bbc7b38
Add -N flag for notifications
2020-02-12 20:12:34 -05:00
4198f67aa2
Mark and unmark on uiHide, uiShow
2020-02-12 19:40:55 -05:00
7285906298
Hide debug prompt if buffer starts with /
2020-02-12 19:36:26 -05:00
14ae13f781
Add C-t transpose
...
Also in emacs, weechat.
2020-02-12 01:16:40 -05:00
aab9f76fa0
Add C-v and M-v
...
I figure there should be some way to scroll without keypad, and
apparently this is what emacs offers...
2020-02-12 01:00:39 -05:00
8d873c71ed
Support monochromatic terminals
...
Oops, division by zero!
2020-02-11 23:01:38 -05:00
907d4b4605
Exit focus and paste modes on err exit
2020-02-11 21:56:29 -05:00
7783d89448
Call completeClear when closing a window
2020-02-11 18:18:48 -05:00
c9590bab06
Use time_t for save signature
...
It's actually more likely to be 64-bit than size_t anyway, and it
eliminates some helper functions.
Also don't error when reading an empty save file.
2020-02-11 18:01:50 -05:00
cc80fae758
Set self.nick to * initially
...
Allows removing a bunch of checks that self.nick is set, and it's what
the server usually calls you before registration.
Never highlight notices as mentions.
2020-02-11 17:52:55 -05:00
2771863299
Define ColorCap instead of hardcoding 100
2020-02-11 17:43:36 -05:00
86fac7caad
Cast towupper to wchar_t
...
For some reason it takes and returns wint_t...
2020-02-11 03:48:50 -05:00
b855ec6210
Cast set but unused variables to void
2020-02-11 03:47:30 -05:00
2404e15e72
Check if VDSUSP exists
2020-02-11 03:42:06 -05:00
bf86a4749f
Invalidate title on uiShow
2020-02-10 22:05:02 -05:00
66fe89b84b
Only write out title if it has changed
2020-02-10 21:34:23 -05:00
90eff04eda
Only write out title on uiDraw
2020-02-10 21:24:30 -05:00
47a0bf7fc2
Manually raise SIGINT from C-c
...
This allows it to still work, but makes C-z C-c insert the color code
rather than exit, and in the future, will allow pasting in text with
color codes.
2020-02-10 21:09:32 -05:00
2c2839e6c1
Replace alignment tabs with spaces in bufferList
2020-02-10 20:54:17 -05:00
3a156540b8
Add C-o as alias of M-/
...
M-/ is from weechat. C-o is like in vim.
2020-02-10 20:29:19 -05:00
99480a42e5
Factor out XDG base directory code
...
And add warnings to configOpen, since that's the only way to be accurate
if a weird error occurs.
2020-02-10 19:57:10 -05:00
e6c18403e2
Leave a blank line after loaded buffer
2020-02-10 19:44:35 -05:00
b59431bb15
Add -s to save and load buffers
2020-02-10 19:40:13 -05:00
C. McEnroe